Feeding Applications:

For Beef Cattle on Pasture

Blueprint� 20 AN Poured is an ideal supplement for cattle consuming moderate to poor quality forages to help improve fiber digestion. Blueprint� 20 AN is uniquely fortified exclusively with highly bioavailable Bioplex� organic trace minerals and contains no inorganic trace mineral forms. The Blueprint� product line is intended to provide optimal trace mineral nutrition to meet today�s advanced animal genetic demands while protecting the environment from unnecessary over supply of less available forms.

Feeding Instructions

CAUTION: USE ONLY AS DIRECTED. Consumption of selenium should not exceed 3 mg per head daily.

WARNING: This product, which contains added copper, should not be fed to sheep or any species that have a low tolerance to supplemental copper.

Introductory Period: Following a 7 to 10 day acclimation period, average consumption should be 1 to 2 pounds for mature cattle with unrestricted forage supplies. Position the blocks 50 to 75 feet from loafing, feeding and watering areas. Some repositioning of blocks may be necessary as animals become acclimated to the presence of the blocks. Move blocks closer to increase consumption; further away to decrease consumption. If overconsumption occurs for more than two weeks and repositioning of blocks does not correct the situation, remove blocks and evaluate the overall feeding program. DO NOT ALLOW STARVED ANIMALS FREE ACCESS TO THIS BLOCK.

Feeding Recommendations:

Feed 1 block per 15 to 30 head. All animals should have equal access to blocks. Timid and smaller animals need their share.
Place blocks where animals congregate. Locate blocks throughout the pasture at loafing, grazing, feeding and watering areas. Adequate distance must be maintained between blocks to minimize crowding -10 feet minimum.
Feed blocks continuously along with a plentiful source of forage and clean, fresh water. Cattle should not run out of blocks. When a block is two-thirds consumed, provide a new block near it.
Cattle should consume 1 to 2 pounds per head daily based on a 1,000-pound animal.
Consumption of this block may vary depending upon animal body condition, quality and quantity of forages, seasonal weather conditions, and most importantly, feeding locations of blocks with respect to loafing, grazing, feeding and watering areas.
For additional information, please contact your Blueprint� representative.

Nutrition Information
Crude Protein, Min 20.00%
Crude Fat, Min 4.00%
Crude Fiber, Max 3.00%
Calcium, Min 0.75%
Calcium, Max 1.25%
Phosphorus, Min 1.00%
Salt, Min 2.50%
Salt, Max 3.50%
Magnesium, Min 3.00%
Cobalt, Min 12 ppm
Copper, Min 112 ppm
Iodine, Min 15 ppm
Manganese, Min 157 ppm
Selenium, Min 3.3 ppm
Zinc, Min 330 min
Vitamin A, Min 100,000 IU/lb
Vitamin D-3, Min 10,000 IU/lb
Vitamin E, Min 100 IU/lb

Product Ingredients

Molasses Products, Processed Grain By-Products, Hydrolyzed Feather Meal, Magnesium Oxide, Monocalcium Phosphate, Dicalcium Phosphate, Hydrolyzed Vegetable Oil, Salt, Calcium Carbonate, Zinc Proteinate, Plant Protein Products, Copper Proteinate, Manganese Proteinate, Selenium Yeast, Cobalt Proteinate, Ethylenediamine Dihydroiodide, Vitamin A Supplement, Vitamin D-3 Supplement, Vitamin E Supplement and Mineral Oil.