For Beef Cattle on Pasture
Conveniently sized for rotational grazing or individualized feeding, Blueprint� 20 AN Pressed contains 20% crude protein from all vegetable based ingredients. It is designed to be fed to beef cattle on good to medium quality forages to help improve forage utilization. Blueprint� 20 AN is uniquely fortified with all highly bioavailable organic trace minerals and contains no inorganic trace mineral forms. The Blueprint� product line is intended to provide optimal trace mineral nutrition to meet today�s advanced animal genetic demands while protecting the environment from unnecessary over supply of less available forms.
CAUTION: USE ONLY AS DIRECTED. Consumption of selenium should not exceed 3 mg per head daily.
WARNING: This product, which contains added copper, should not be fed to sheep or any species that have a low tolerance to supplemental copper.
Introductory Period: Following a 7 to 10 day acclimation period, average consumption should be 1 to 2 pounds for mature cattle with unrestricted forage supplies. Position the blocks 50 to 75 feet from loaﬁng, feeding and watering areas. Some repositioning of blocks may be necessary as animals become acclimated to the presence of the blocks. Move blocks closer to increase consumption; further away to decrease consumption. If overconsumption occurs for more than two weeks and repositioning of blocks does not correct the situation, remove blocks and evaluate the overall feeding program. DO NOT ALLOW STARVED ANIMALS FREE ACCESS TO THIS BLOCK.
Feed at a rate of one block per 5 to 15 head. All animals should have equal access to blocks. Timid and smaller animals need their share.
Place blocks where animals congregate. Locate blocks throughout the pasture at loaﬁng, grazing and watering areas.
Adequate distance must be maintained between blocks to prevent crowding - 10 feet minimum.
Feed blocks continuously along with plentiful sources of forage and clean, fresh water. Animals should not run out of blocks. When a block is two-thirds consumed, provide a new block near it. Place very small pieces in a feed pan or trough to be cleaned up.
Cattle should consume 1 to 2 pounds per head daily based on a 1,000-lb animal.
Consumption of this block may vary depending upon animal body condition, quality and quantity of forages, seasonal weather conditions, and most importantly, feeding locations of blocks with respect to loaﬁng, grazing, feeding and watering area
For additional information, please contact your Blueprint� representative.
Crude Protein, Min 20.00%
Crude Fat, Min 1.50%
Crude Fiber, Max 11.00%
Calcium, Min 6.00%
Calcium, Max 7.00%
Phosphorus, Min 3.00%
Salt, Min 10.00%
Salt, Max 12.00%
Magnesium, Min 1.00%
Cobalt, Min 12 ppm
Copper, Min 112 ppm
Iodine, Min 15 ppm
Manganese, Min 157 ppm
Selenium, Min 3.3 ppm
Zinc, Min 330 minv
Vitamin A, Min 40,000 IU/lb
Vitamin D-3, Min 4,000 IU/lb
Vitamin E, Min 40 IU/lb
Plant Protein Products, Processed Grain By-Products, Monocalcium Phosphate, Dicalcium Phosphate, Molasses Products, Salt, Roughage Products, Calcium Carbonate, Calcium Hydroxide, Magnesium Oxide, Manganese Proteinate, Zinc Proteinate, Copper Proteinate, Cobalt Proteinate, Selenium Yeast, Ethylenediamine Dihydroiodide, Vitamin A Supplement, Vitamin D-3 Supplement, Vitamin E Supplement and Mineral Oil.